Product Overview
1x - Cleanout Drill
Already bought a Premium Starter Kit and don't need a complete Drill Kit, just a Cleanout Drill? This 1-Pack is right for you
The Cleanout Drill is installed in the Pin Vise and manually rotated clockwise in the Access Drill channel following the 5x5 Technique. The Cleanout Drill is used to remove the Peek Cap from the TIBase and remove any residual debris left behind.
5x5 Cleanout Drill Technique:
- 5 turns clockwise with light pressure on pin vise
- 5 turns clockwise while wobbling bit in screw channel
- 5 turns clockwise with firm pressure on pin vise
- 5 turns clockwise with light pressure on pin vise
- 5 turns clockwise while retracting cleanout drill from screw channel
We recommend using a NEW Drill Kit for each conversion, to ensure you have sharp bits for quicker drilling and cleaner holes. Dull bits can cause slow drilling, resulting in excess heat that can dislodge the TiBase.
Caution: Drill bits should always be used to drill straight and force should never be loaded off axis, which could cause
damage to the bit or drilling material, that could result in personal injury.
Need a more Complete Option with a Cleanout Drill?
Need Other Refill Supplies?
Need Some Training First?
