Product Overview
Already bought a Premium Starter Kit and just need some sharp drill bits for your next conversion? This Drill Kit is for you!
Drill Kit contains the three drills needed to create a pilot hole, create a screw channel, and clear the PEEK cap and debris from the TiBase.
Pilot Drill - Installed into a laboratory handpiece and is used to create a pilot hole through the TiBase to the occlusal/cameo surface.
Access Drill - Installed into a laboratory handpiece and is used from the occlusal/cameo surface to expand the pilot hole to 3/32”. The tip of the bit will fit into the pilot hole and help guide it until you hit the top of the TiBase.
Cleanout Drill - Installed in the Pin Vise and manually rotated clockwise in the Access Drill channel following the 5x5 Technique. The Cleanout Drill is used to remove the Peek Cap from the TiBase and remove any residual debris left behind.
5x5 Cleanout Drill Technique:
-
- 5 turns clockwise with light pressure on pin vise
- 5 turns clockwise while wobbling bit in screw channel
- 5 turns clockwise with firm pressure on pin vise
- 5 turns clockwise with light pressure on pin vise
- 5 turns clockwise while retracting cleanout drill from screw channel
We recommend using a NEW Drill Kit for each conversion, to ensure you have sharp bits for quicker drilling and cleaner holes. Dull bits can cause slow drilling, resulting in excess heat that can dislodge the TiBase.
Caution: Drill bits should always be used to drill straight and force should never be loaded off axis, which could cause
damage to the bit or drilling material, that could result in personal injury.
Drill Kit contents
- 1x - Pilot Drill
- 1x - Access Drill
- 1x - Cleanout Drill
Need a more Complete Option?
Need to Refill Supplies?
Need Some Training First?
